Dichtsysteme

The VIBA-Flex joint sheet metal with mounting foot is coated in a special polymer-bitumen coating. The coating is protected through a tearproof protection paper.

For more stability light angle. The sealing plate is made of galvanised steel and has polymer bitumen coating on both sides (Adhesive coating).

Joint tape with internal round steel stirrups. Prevents the belt from bending during the concreting process. Typ a (width) b c f 61AS200 200 mm 70 mm 3,5 mm 15 mm 61AS250 240 mm 80 mm 3,5 mm 15 mm 61AS320 320 mm 100 mm 4,0 mm 15 mm...

Unser VIBA-Sinterflex Fugenblech ist beidseitig mit einer patentierten „aktiven“ Spezialbeschichtung versehen. Diese ist nicht klebrig und hat keine Schutzfolie, die vor dem Betonieren entfernt werden muss. Die Beschichtung verbindet...

The joint tape roll is made of galvanized stell with a both sided polymer-bitumen coating. The coating is protected by a paper which is lenghtwise split for easier usage. Roll á 20 lfm

Fixing clip Ø 2 mm for VIBA-Flex to fix the element joints.

Compression hose circular, dim. 5/10 mm with fabric double-overcoat

Injektions Schaumharz PROTECT - Niedrigviskoser Schaum auf Polyurethanbasis. Stoppt sofort den Wasserzufluss, schnelles aufschäumen mit hoher Volumenzunahme, erfüllt UBA Leitlinie für Kontakt mit Trinkwasser. Reaktionszeit bei...

Injection resin - PROTECT Expansive polyurethane resin for crack and hose injection in wet areas. Consumption hose compression: ca. 1,5L per 10 m Approved for drinking water applications, low viscosity and permanently elastically, long...

Plastic fixation clip type A to impress into fresh concrete or in boreholes Ø 8 mm, Mountig al 15 cm

Upturn beam element made of wave-profiled perforated metal plate in order to set on edge in the area of the bottom plate. Including a integrated water bar or joint plate holder. Element length: 2500 mm (standard)

Stop end panel made of a wave-profiled perforated metal plate in order to set a stop end in the wall or in the bottom plate.