Technical description: Storage: 2 years at 20 ° C Consistency: pasty, stable Processing temperature: + 5 ° C to + 35 ° C Consumption: approx. 1.6 kg per liter of cavity Heat resistance: + 50 ° C
The new KG-FIX sealing collar is suitable for sewage pipes DN110 (outer diameter ø 110 mm) and rigid, smooth plastic pipes according to DIN EN 1852-1 / EN 13476 / DIN 16873 / DIN 8061/62, which are used watertight in floor slabs,...
Annular seal - cable 5-fold Ø 100 mm MR 8-35 mm Tested up to 10 m WS (1 bar) Hinged annular seal for core drilling / wall sleeves Ø 100 mm Segment ring technology for 1 cable / pipe Ø 22 - 44 mm as well as 4 cables Ø 7-12 mm completely...
Seal for pressing and non-pressing water Tested for continuous use up to 30 m water column Press plates and screws made of V2A stainless steel Sealing width 40 mm NBR rubber insert Temperature range -30 ° C to + 120 ° C
Super segment ring technology for cables and pipes 3 segment rings with diameter lettering for Ø 75, 90 and 110 mm Subsequently divisible for pipes that have already been laid for core drilling / wall sleeves Ø 150 mm Seal width 40 mm,...
The Flex 2000 cartridge is clamped in the cartridge gun and pressed into the penetration from back to back with an attached flexible spray nozzle in a layer thickness of at least 8 cm.
Gas and water tight sealing for drill holes, tubes, etc. Rubber insert made of EPDM, press plates made of stainless steel V2A completly gastight and watertight pressing water 2.5 bar (30 m WS) radon tight KTW/W270 drinking water - quality
Super segment ring technology for cables and pipes segment rings with diameter inscription for Ø 110, 125, 135 and 160 mm Subsequently divisible for pipes that have already been laid for core drilling / wall sleeves Ø 150 mm Seal width...
Annular seal - 4-fold cable Ø 100 mm MR Ø 6-40 mm Tested up to 10 m WS (1 bar) Hinged Annular seal for core drilling / wall sleeves Ø 100 mm Segment ring technology for 1 cable / tube Ø 25, 32 or 40 mm as well as 3 cables Ø 6-18 mm...
Viewed