VIBA - formwork boads ECO ECO Lost framework length: 1,25 m for ceiling formwork Material: Wood concrete slab Element - Length: 1250 mm, other lengths on request Material - Thickness: 10 or 14 mm Advantages: lost formwork doesn't have to be removed from the...
VIBA - formwork boads HB Material: Wood concrete slab Element - Length: 1600 mm, other lengths on request Material - Thickness: 10 or 14 mm Advantages: lost formwork doesn't have to be removed from the concrete easy mounting through screws or nails (light...
Deckenrandschalung XPS 35 FZ ISO Slab edge shuttering and insulation in one . 35 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
Deckenrandschalung XPS 50 FZ ISO Slab edge shuttering and insulation in one . 50 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
Stop end formwork made of woodconcrete Stop end formwork made of woodconcrete. Element length - 200 cm Material strength - 10 mm Width at foot - 70 mm
Baustütze - Mini (DC) With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
Deckenstütze Euro (DO) nach EN 1065 Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no...
Deckenstützen Euro (DC) nach EN 1065 All versions with failure protection, accident proof. Props in different sizes and versions. Failure loads tested according to EN 1065. Produced and tested according to EN 1065 , with covered thread (DC). With failure protection and...
Deckenstütze Stabil (DC) nach EN 1065 Produced and tested according to EN 1065, with covered thread (DC). Props in different sizes and versions. With failure protection and accident proof. Headplate: class A 120 x 120 x 6 mm, with borehole Ø 40 mm G-hook: Ø 14 mm (no...
Viewed