Products from Unbekannter Hersteller

Fixed scaffold jack, no foldaway Robust steel-construction Absolutely stable Resting width: 100 cm Height adjustable every 5 cm 2 jacks can be connected with an interposed steel tube

Stacking frame for crank bracket To increase the height by 1 m.

Scaffold jacks Crankable scaffold jacks are infinitely adjustable by cranking. Adjustable from both sides with crank and star wheel. Important: Up from a height of 2 m is a side protection absolutely necessary (handrail post). Suppliable...

Resting width: 120 cm Height adjustable every 10 cm Permitted load 6 kN * Foldable Space saving with transport and storage

Perpendicular and angle setting Infinite adjustment with integrated spring base part Can be clamped between ground and ceiling Adjustment of the levels possible in varaible heights by sliding eyelets With synthetic cap on the upper end...

Can be ordered in three sizes: Thread length M 8 x 15mm Thread length M 10 x 25 mm Thread length M 12 x 20 mm

Product properties: non-flammable passable insensitive to moisture frost-resistent easy perforation of openings Bulk density: 300 kg m³, +- 5% Compressive strength: 240 kPa (10% compression) Baustoffklasse: A2, s1, dO(ÖNORM EN 13501-1)

Material: Steel blank, optional steel galv. Special materials on request. Standardlength 3 m, other lengths on request. Length tolerence for fixed lengths in mm: to DN 250 +/- 5m

Inner corner made of steel with clamping screws Ø 15 mm For shaft formwork, ceilings- door- and wall-recess Easy and fast mounting and dismantling For wooden formwork 12 - 35 mm thickness The fast and universal solution for your...

All versions with failure protection, accident proof. Universally usable as pressure- and traction props to support and adjust prefabricated concrete elements and formwoks. Flexible head- and baseplate Headplate: 140 x 100 x 6 mm, with...

Suppliable with a galvanised or lacquered surface.

With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!