Products from Unbekannter Hersteller

Colour spray 500 ml for precise and professional marks. Available in different colours.

The distance stripes are situated between the upper and lower reinforcement panel as well as between the external and internal reinforcement wall. They don t sit on the formwork (no plastic feet) therefore, a proper exposed concrete can...

Application: For concreting storey ceilings or concrete slabs as spacers for the lower reinforcement. Furthermore, the Speedies surface spacers can also be used very well in the precast concrete plant thanks to the pointed feet. With...

Application: For concreting floors or concrete slabs as spacers of the lower preservation. Furthermore, the Speedies surface spacers can also be used very well in the concrete precast plant due to the pointed feet. Your advantage:...

Flat seal thickness 8 mm or 2 mm The pressure cones are attached to the spacer tube. After concreting, the pressure cones are removed from the concrete.

Plastic plugs (colour gray) to close the spredaer after form removal.

Concrete-gray made of elastic plastic

The high-quality exposed concrete cones are bonded, with contact adhesive X1, in the remaining opening after removing the pressure cones. Apply the contact adhesive on the backside to obtain a clean visible area.

The high-quality, precisely tailored exposed concrete cone is glued in flush after the pressure cones have been removed in order to achieve a clean visible surface.

With internal thread for Ø 15 mm Dywidag tension rod. Perfect use for fastening slab edge formwork, consoles, scaffolding, guardrails, etc. Permissible load: 28 kN.

Slab edge shuttering and insulation in one . 50 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.

Schalungsfugenbänder Sabajoint: Spezial-Abdichtungsbänder für den Sichtbeton. Sie gewährleisten eine makellose saubere Sichtbeton-Oberfläche, lassen sich einfach und zeitsparend an der Schalung anbringen und rückstandslos wieder...