Products from Unbekannter Hersteller

Ausführung schwarz. Zur Befestigung in Schalung wird der Montagefuß (65CM15F) empfohlen. Einbautiefe: 108 mm, Betongüte: >= B 25. Prüfbescheinigung in Anlehnung DIN 18216 Type [Klein] - Max. Tragkraft mit 3-facher Sicherheit bei: B25 =...

The center hole is 30 mm up to a disc diameter of 450 mm, and 60 mm above it

By draining waste water in a uniform flow direction without unnecessary edges, clogged pipes and nasty surprises are avoided. This can be done easily with the VIBA KG pipe bushing type UDM. Thanks to the innovative connection, external...

TPE (thermoplastic elastomer) - swelling tape for the safe sealing of construction joints and penetrations, in concrete structures, against the ingress of water. Because of the swelling and the swelling pressure generated during the...

U-shaped bar spacer made of PE plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm. Other lengths available.

Cones made of plastic, suitable for tube struts with a inner diameter of 22 mm respectively 26 mm. The remaining conical openings, after removing the pressure cones, are sealed with conrecte cones 40/5 and sealing adhesive. Pressure...

Plastic plugs (colour gray) to close the spredaer after form removal.

Three layer plywood weather-resistant glued Surface with melamine-resin (yellow). Other colours on request. Special formats on request Additional millings possible! All standard cuts are possible!

Flange nut for different anchors with plate diameter [Ø] of 70mm with three wings. Type galvanized.

Wood formwork: chipboard coated on both sides Tilt & Turn window Color white Insulating glazing U-value 1.1 single-leaf Execution: right or left ADVANTAGE of the one-sided formwork: no temperature loss through the outside window

Formwork tube for rectangular columns Standard lengths 3m and 4m Other lengths on request!

Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 20 mm for non-pressing water up to 1.5 bar completely gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To...