Products from Unbekannter Hersteller

Robust mash connector made of steel of 5 mm diameter including two sputtered plastic clamps. Keeps the distance between the mashes as well as the distance between the meshes and the formwork. Other concrete cover on request!

Stable spacer made of concrete for wall- and ceiling-reinforcement. Also available without wire.

Stable exposed concrete spacer with 4-point batch used for wall- and ceilings-reinforcement

Stable exposed concrete spacer with 4-point batch used for wall- and ceilings-reinforcement

Made of fibre concrete for horizontal and vertical reinforcement.

Application: For concreting storey ceilings or concrete slabs as spacers for the lower reinforcement. Furthermore, the Speedies surface spacers can also be used very well in the precast concrete plant thanks to the pointed feet. With...

Application: For concreting floors or concrete slabs as spacers of the lower preservation. Furthermore, the Speedies surface spacers can also be used very well in the concrete precast plant due to the pointed feet. Your advantage:...

Spacing strip to use on soft underground. Mill length: 200 cm. Other lenghts available. (PVC - free by request)

U-shaped bar spacer made of PE plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm. Other lengths available.

Skidproofed and tilt secured spacer for the bottom reinforcement. There will be no shrinking as the concrete encloses the batten completly. Due to the special form a linear interruption can be avoided. Mill lenghts 200 cm. Other lenghts...

Flat seal thickness 8 mm or 2 mm The pressure cones are attached to the spacer tube. After concreting, the pressure cones are removed from the concrete.

Cones made of plastic, suitable for tube struts with a inner diameter of 22 mm respectively 26 mm. The remaining conical openings, after removing the pressure cones, are sealed with conrecte cones 40/5 and sealing adhesive. Pressure...