Building needs

Close filters
13 From 26
Rock anchor Ø 15 mm - borehole 33-35 mm Rock anchor Ø 15 mm - borehole 33-35 mm
For non-positive attachment to existing concrete or rock walls. The depth of the borehole depends on the type of rock or concrete. Security advice: Check tie points for load-bearing capacity before loading (there are different concrete...
Felsanker Ø 15 mm mit Zulassung Felsanker Ø 15 mm mit Zulassung
Zur temporären Aufnahme großer zentrischer Zugkräfte. Die Bohrlochtiefe hängt von der max. Belastung des Ankers und damit von der Setztiefe ab. Zuverlässige Problemlösung und einfache Handhabung Geprüft von der Universität Dortmund –...
Rock anchor Ø 15 mm, aluminum, 3-part Rock anchor Ø 15 mm, aluminum, 3-part
Anker zur kraftschlüssigen Befestigung an vorhandenen Beton- oder Felwänden. Die Bohrlochtiefe hängt von der Gesteins- und Betonart ab. Sicherheitshinweis: Ankerstelle vo der Belastung auf Tragfähigkeit prüfen.
Knock-in anchor D&W Ø 15mm Knock-in anchor D&W Ø 15mm
With internal thread for Ø 15 mm Dywidag tension rod Borehole Ø 22 mm borehole depth 95 mm Permissible load capacity min. 17.0 kN with a minimum concrete strength of 15N / mm²
Knock-in anchor D&W Ø 15mm type 2 (grooved) Knock-in anchor D&W Ø 15mm type 2 (grooved)
Type 2 grooved With internal thread for O 15 mm Dywidag tie rod. Borehole O 22 mm, borehole depth 95 mm. Permissible load at least 17.0 kN for concrete strength 15N / mm2
Protective mats Super (frost protection) Protective mats Super (frost protection)
The protective mats SUPER is bothsided coated with a white layer (Summer side) and a black layer (Winter side) Scope of application: Frost protection for Winter (enables concrete work to -5 Degree C without hardness decrease) Evaporation...
Premium nut galv. Premium nut galv.
Plate with mobile wing nut. Design galvanized.
Earthing fixed point Ø 80 mm M 10 / M 12 stainless steel A4 without axis Earthing fixed point Ø 80 mm M 10 / M 12...
for connection to the reinforcement of buildings and for connection for leads
Hot air welding machine without nozzle with PVC case Hot air welding machine without nozzle with PVC...
For welding joint tapes on the construction site with hot air. Suitable for construction sites Functional design: 2-component handle and optimal center of gravity ensure ergonomic work Quick cleaning of the air filters Automatic coal...
Hot air welding machine without nozzle with PVC case Steinel Typ HG 2420 E Hot air welding machine without nozzle with PVC...
Reliability for professional demands! For welding joint tapes on the construction site with hot air Technical specifications: Power: 2200 W Temperature: 80-650 degrees Celsius Air volume: 150-400 l / m Temperature display: setting wheel...
Seal "onion ring" technology Ø 100 mm - divisible MR Ø 18 - 65 mm Seal "onion ring" technology Ø 100 mm -...
Super segment ring technology for cables and pipes; 12 segment rings with a diameter of 16 - 65 mm; simply tear off the segments until they fit split design, suitable for subsequent installation Seal width 40 mm, pressure-tight up to 1...
Iron weaver pliers Stubai No. 113301 Iron weaver pliers Stubai No. 113301
Iron weaver pliers for multi usage on the construction site. High quality and brand Stubai No. 113301
13 From 26
Viewed